Wedding Coozies

I am at the time in my life where all my friends are getting married and making babies. I’m at the tail end of weddings and engagement parties for the year. For 3 different couples I made these ‘his’ and ‘hers’ and ‘hers’ cozies for the engagement parties or welcome dinners.

Supplies:

  1. Black Quilt Fabric
  2. White Quilt Fabric
  3. Satin Fabric (I bought searching through the remnant bin, 1/2 off!)
  4. Lace Ribbon
  5. White Elastic
  6. Flowers
  7. Typical sewing supplies

wpid-20150803_200723.jpg

First determine dimensions. I cut the back side of each out of white and black; rectangles of 4-1/2 by 9-1/2 inches. The bride front was two white rectangles at 2-3/4 by 9-1/2. Then a skirt was cut at 3 -1/2 by 11.  The groom front were two panels, 4-1/2 by 5 and 4-1/2 by 5-1/2.

wpid-20150803_201134.jpg

To make the groom front I pinned the two panels together as shown below with a piece of white fabric as the “undershirt” – do not sew.

wpid-20150803_204613.jpg

For the bride front I first gave the skirt a hem on three sides by folding the edge over twice and sewing. Then I pinned the skirt between the two white panels giving it ruffles and make sure to keep it at least a half inch from the edge. These were sewn together with a 1/4 inch seam.              wpid-20150803_211146.jpg

For each the bride and groom the front was sewn to the back, right sides together. Be sure to pin in the skirt as shown below so it does not get caught up in the hem, and sew with a 1/4 inch seam leaving a 2-inch gap on one short side to be able to reverse the coozie.

wpid-20150803_211330.jpg

After the coozie is reversed, put the two elastic bands folded in half into the open section and pin. Then give it a hem around all 4 side, reinforce the elastic bands with another pass over that section. For the groom sew down the front along where it should still be pinned, the groom was done with black thread, it was the only time I had to switch thread. The final move is to sew buttons on the opposite side of the elastic.

wpid-20150804_171044.jpg

The veil was made with one zig-zag seam with the top of the ribbon folded over by a half inch. Then an elastic band was inserted in the loop, and sewn closed. Flowers were sewn along the front of the band. I also put a matching flower on the groom’s coozie in the pocket area.

wpid-20150804_202352.jpg

Final products shown on a bottle before flowers were sewn on.

wpid-20150813_220003.jpg                               wpid-20150813_215851.jpg

Final products shown on cans.

wpid-20150804_202306.jpg

Two of three couples that were recipients shown below. They loved it and that was the real purpose of making these!

wpid-20150814_192408.jpg            wpid-20150805_195513.jpg

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s